The Allrounder XL | Spade Bits 12–25mm + Tri-Flute Bits 16–32mm + Auger Bits 18 & 22mm | 15 pcs

The complete wood drill bit set – the right bit for every job in wood. The BlitzWave™ spade bit set for ultrafast drilling from 12 to 25mm, the tri-flute bit set for cleaner holes from 16 to 32mm, and two 230mm auger bits in the two sizes you need for electrical conduit – for cable and pipe runs through several studs, joists and thick structural timber.

This set includes:

Spade bit 12mm x 1
Spade bit 16mm x 1
Spade bit 18mm x 1
Spade bit 20mm x 1
Spade bit 22mm x 1
Spade bit 25mm x 1
Hex extension 152mm x 1
Storage pouch x 1
Tri-flute bit 16mm x 1
Tri-flute bit 18mm x 1
Tri-flute bit 20mm x 1
Tri-flute bit 22mm x 1
Tri-flute bit 25mm x 1
Tri-flute bit 32mm x 1
Storage box x 1
Auger bit 18mm × 230mm x 1 (for 16mm conduit)
Auger bit 22mm × 230mm x 1 (for 20mm conduit)

Features and benefits:

• The right bit for the job:
The spade bits handle the quick holes through studs and sheet material. The tri-flute bits give clean holes where the finish matters. The auger bits take over when the hole has to go through several layers or deep structural timber.

• Ready for conduit:
The 18mm and 22mm auger bits are made for 16mm and 20mm flexible conduit, so the conduit pulls easily through several studs and joists in a row.

• Up to 3x faster spade bits:
The self-feed threaded tip pulls the bit through the wood, and the curved BlitzWave™ blade ejects chips fast and prevents clogging.

• Cleaner holes with tri-flute bits:
Three cutting spurs score the perimeter before the rest of the bit removes the material, for less splintering at the hole edge. Three flutes carry chips out and reduce binding – even in hardwood.

• Deep holes without pushing:
The auger bits have a self-feed threaded tip and a spiral flute that carries chips all the way out – approx. 160mm usable drilling length.

• Built for wood:
Softwood, hardwood, plywood, chipboard and structural timber – cable and pipe runs through timber framing, joists and log cabins, boring for locks and door cylinders, and general carpentry and renovation work.

• Compatibility:
Spade and tri-flute bits: drill drivers, drills and impact drivers with a 1/4" hex holder. Auger bits: drill drivers and drills with a standard 13mm chuck – not suitable for impact drivers or 1/4" bit holders. Use in drill mode only – no hammer action.

• Overall length:
Spade bits 152mm. Hex extension 152mm. Tri-flute bits 160mm. Auger bits 230mm.